The following project variables relate to the Projection variable category. They access information regarding the CatchmentSIM project projection.
These project variables must all be prefixed with %Projection. eg., %Projection.Name.
ProjectionType |
The type of projection used. For example, ’ptLatLong’. |
Text |
|
Name |
The name of the projection datum. Depending on how the project was setup, this may be blank. |
Text |
|
RefLat |
The Reference Latitude (if applicable). |
decimal |
degrees |
RefLong |
The Reference Longitude (if applicable). |
decimal |
degrees |
ScaleFactor |
The Scale Factor (if applicable). |
decimal |
|
FalseEasting |
The False Easting (if applicable). |
decimal |
|
FalseNorthing |
The False Northing (if applicable). |
decimal |
|
StdParallel1 |
The Standard Parallel 1 (if applicable). |
decimal |
degrees |
StdParallel2 |
The Standard Parallel 2 (if applicable). |
decimal |
degrees |
Azimuth |
The Azimuth (if applicable). |
decimal |
|
UnitsText |
The units of the project in text form. Eg ‘m’ |
Text |
|
UnittoMetreConversion |
The multiplier to convert project units to metres. |
decimal |
|
CustomProjection |
A Boolean indicating if the project was setup as a custom projection |
True / False |
|
EllipsoidName |
The name of the Ellipsoid (if applicable). |
Text |
|
EllipsoidSM |
The semi major axis of the Ellipsoid (if applicable). |
decimal |
|
EllipsoidFlat |
The flattening of the Ellipsoid (if applicable). |
decimal |
|